o

Introduce

UV Lasers

Visible DPSS Lasers

Visible Diode collimated Lasers

Infrared DPSS Lasers

Infrared Diode collimated Lasers

Low Noise Lasers

  457nm Low Noise Lasers

  473nm Low Noise Lasers

  532nm Low Noise Lasers

      532nm LN Lasers 1-500mW

      532nm LN Lasers 600-1500mW

      532nm LN Lasers 2W-3W

      532nm LN Lasers 4W-10W

  593nm Low Noise Lasers

  671nm Low Noise Lasers

  946nm Low Noise Lasers

  1064nm Low Noise Lasers

  1342nm Low Noise Lasers

Single Longitude Mode Lasers

Q-switched / Pulsed Lasers

RGB / RG Lasers

Fiber Lasers

Laser Pointers

Laser Collimator

Laser Scanner System

Laser Accessory

DPSS 532nm Low Noise Green Laser
Specifications:
Model
SDL-532-LN-XXXT
Output Power @ 25 ¡æ
4000~10000mW
Wavelength
532nm
Operation Mode
CW, near TEM00
Beam height from base plate (mm)
93.5mm
Linear Polarization
>100:1
Beam Diameter at the aperture
~4.0mm
Beam Divergence (1/e2, Full Angle)
<2.0mrad
Power Stability after warm-up
<1%, <3%, <5% (over 2/4/8 hours)
M2 factor
<2.0mm
Warm-up time
<10 minutes
Dimension of laser head
333 x 140 x 125mm
Power Supply
SDL-PS-800
Dimension of Power Suply
300 x 162 x 134mm
Input Voltage
90-264VAC, 50/60Hz
Modulation
TTL Modulation >5KHz or analog Modulation >2KHz
Operating Temperature
10¡æ¡«35¡æ
Expect life time
10000 hours
Noise of amplitude (rms, 1~20MHz)
<1%
Warranty time
1 year
Note:
See the Glossary and Technology for information about the terms used
In the front of the laser, we add an infrared filter. The residual IR part is less than 10-3. Please refer to the technology page for more information about the filter.
Other Sytles and custom designs are available. Contact us to discuss your needs.

Home | Company Profile | Lasers | Optics | Crystals | Support | Contact
Copyright © 2002-2008 by Shanghai Dream Lasers Technology Co., Ltd.